Walnut-coloured floor-to-ceiling doors without architraves
EGD-LUXUS · PREMIUM interior doors
EGD-LUXUS interior doors with an aluminium frame and door leaf frame
Hinged doors up to 3200 mm high, plaster-in frame, any finish – which can differ on each side.
Floor-to-ceiling doors without architraves
3200 mm
hinged door height; sliding doors up to 3600 mm
51 mm
door leaf thickness – the same for smoke-tight and fire-rated doors
80 kg
a 900 mm wide door leaf is held by 2 hinges
200 000+
opening cycles with an 80 kg door leaf, GTC test to LST EN 1191
Floor-to-ceiling door in a corridor with ceiling lighting
Pocket sliding doors
Veneer finish and handle
About the product
Tall doors that keep their geometry
EGD-LUXUS are PREMIUM interior doors. Not only the frame but the entire door leaf frame (carcass) is made of aluminium, so the doors keep their geometry and do not warp – whether there is a humid bathroom or a cold garage on one side.
The frame is plastered in, so the doors have no architraves. The chosen finish is inset into the door leaf frame, and a 3 mm aluminium edge around the entire perimeter protects its edge – the doors do not peel or chip.
Doors with the same appearance can be acoustic, while smoke-tight (LINE 50S) and fire-rated (LINE 50F) doors are certified. The doors in every room look the same.
We developed the system ourselves: the aluminium profile extrusion dies were made to our order. We design, manufacture and install ourselves.
Suitable for
01
For tall openings
Floor-to-ceiling doors: hinged up to 3200 mm, sliding up to 3600 mm.
02
For heavy or delicate finishes
Tiles, quartz or granite slabs, mirror.
03
For different rooms
A humid bathroom or a cold garage on one side – the doors keep their geometry.
04
For hotels and offices
Smoke-tight and fire-rated doors – with the same finish.
Construction
Aluminium frame and aluminium leaf frame
The door leaf carcass consists of aluminium profiles around the entire perimeter. The corners are joined with clamping corner connectors and two-component adhesive.
51 mm
door leaf thickness
30 / 44 mm
frame depth / overall depth
3 mm
aluminium edge strip around the entire leaf perimeter
180°
opening angle with concealed hinges
Class C5 (self-closing durability) – only for smoke-tight and fire-rated doors (LINE 50S, LINE 50F).
Aluminium frame
The frame is plastered flush into the wall. The door can reach the ceiling.
Aluminium leaf frame
The door leaf carcass consists of aluminium profiles around the entire perimeter. The corners are joined with clamping corner connectors and two-component adhesive.
Concealed hinges
JNF IN.05.062 with 3D adjustment. The hinges fitted to all EGD-LUXUS doors withstood more than 200 000 opening cycles with an 80 kg door leaf in a laboratory test (GTC, LST EN 1191) – without damage and without additional adjustment.
Aluminium edging
The 4 mm finish is recessed into the leaf frame, and a 3 mm aluminium edge strip protects its edge. Core – Stadur multi-layer thermal insulation board.
Wall finish at the frame
On masonry and plasterboard walls, the finish is brought to approximately 0.5 mm from the frame edge; with wall panels, approximately 2 mm.
Installation details
Details for different walls and ceilings
01
Masonry wall
Standard and reverse opening. The finish is brought to within ~0.5 mm of the frame edge.
02
Plasterboard wall
Standard and reverse opening. The finish is brought to within ~0.5 mm of the frame edge.
03
With wall panel
Wall panel fixed with adhesive and expanding foam. The finish is brought to within ~2 mm of the edge.
04
Plasterboard ceiling
7 mm plaster-in head profile.
05
Concrete ceiling
Expanding tape and acrylic sealant, gap ~2 mm.
06
Floor-to-ceiling doors
Standard frame – when the door reaches right up to the ceiling; non-standard – when the door leaf reaches the ceiling between rooms with ceilings at the same height.
Technical data
Dimensions and technical data
The height limit works together with the weight limit – the taller the door leaf, the narrower it can be.
| Construction | |
|---|---|
| Door leaf thickness | 51 mm |
| Door leaf frame | Aluminium carcass around the entire perimeter |
| Frame | Aluminium profiles, symmetrical profile, plaster-in |
| Frame depth / overall depth | 30 mm / 44 mm |
| Reveal thickness | 10–15 mm |
| Infill | Multi-layer thermal insulation board Stadur |
| Finish | 4 mm, inset into the door leaf frame; may differ on each side |
| Edge | 3 mm aluminium, around the entire door leaf perimeter |
| Painting | Any colour from the RAL palette |
| Dimensions | |
| Max. height – hinged | 3200 mm |
| Max. height – sliding | 3600 mm |
| Max. height – acoustic | 3200 mm |
| PIVOT – single door leaf dimensions | 1600 × 3400 mm |
| Hardware | |
| Hinges | Concealed, 3D adjustment, JNF IN.05.062 |
| Number of hinges | Up to 2400 mm – 2; 2400–2800 mm – 3; over 2800 mm – 4; acoustic doors – at least 3 |
| Hinge load (900 mm wide door leaf) | 2 hinges – 80 kg; 3 hinges – 120 kg; 3 hinges with door closer – 90 kg |
| Opening angle | 180°; with integrated GEZE ActiveStop door closer – up to 140° |
| Lock | Magnetic lock |
| Seals | In the frame and door leaf |
Configurations
Opening types
Hinged doors – standard and reverse opening. Acoustic, smoke-tight and fire-rated doors look the same.
01
Single
Learn more
02
Double
Learn more
03
With transom panel
Learn more
04
With glazed side panel
Learn more
05
Sliding
Up to 3600 mm high
Learn more
06
PIVOT
Single door leaf dimensions 1600 × 3400 mm
07
Glass
08
Concealed floor-to-ceiling doors
Hinged up to 3200 mm
Learn more
Special properties
The same appearance – acoustic, smoke-tight, fire-rated
Smoke-tight and fire-rated doors are no different from other EGD-LUXUS doors: the same design, the same finishes, the same 51 mm door leaf thickness.
| Property | Doors | Class / value | Test, document |
|---|---|---|---|
| Operating durability | All EGD-LUXUS (hinges) | More than 200,000 cycles with an 80 kg door leaf – without damage and without additional adjustment | GTC, LST EN 1191 |
| Fire resistance | LINE 50F | E 30, EW 30, EI2 30 | LST EN 1634-1, LST EN 13501-2 · SPSC-9711 |
| Smoke tightness | LINE 50F, LINE 50S | Sa3, S200 | SPSC-9711, SPSC-9712 |
| Self-closing durability | LINE 50F, LINE 50S | C5 | LST EN 1191 · SPSC-9711, SPSC-9712 |
| Acoustics | Acoustic EGD-LUXUS | Optional construction: SANDWICH acoustic infill (42 dB) and TECSOUND SY 3.5 mm membrane (23 dB) | Max. height 3200 mm, at least 3 hinges |
Certificates and class C5 apply only to LINE 50F and LINE 50S doors. The certificates were issued by the Construction Product Certification Centre (SPSC) and are valid until 24 July 2028. An automatic drop seal is mandatory for these doors. The dB values for acoustic doors refer to the infill and membrane.
Finishes
Any finish – can differ on each side
01
Doors painted in the wall colour
02
Primed doors
03
Natural oak veneer – painted or stained
04
ALPI veneer
05
Furniture board
06
Milled panel
07
Wallpaper
08
Canvas
09
Leather
10
Decorative or clay plaster, microcement
11
Tiles on doors and walls
12
LAMINAM sintered stone slab
13
Natural stone – marble, granite, quartzite
14
Lightweight stone – flexible stone veneer
15
Metal – Corten steel, aged brass, copper
16
Mirror – clear, tinted
17
Lacquered glass
18
Double glazed – clear, tinted or fluted glass
19
Switchable SMART glass
20
Artwork on doors
21
Any other finish of your choice
Painting – any colour from the RAL palette.
Accessories
Hardware and accessories
As standard
JNF concealed hinges
3D adjustment, the door opens to 180°. Number by height: up to 2400 mm – 2, 2400–2800 mm – 3, over 2800 mm – 4.
As standard
Magnetic lock and seals
Seals in the frame and the door leaf ensure quiet, smooth operation.
Optional
Integrated GEZE ActiveStop door closer
Brakes the door and pulls it shut when closing; the opening angle is adjustable within 80–140°. No floor stop is needed.
Optional
Integrated Sugatsune LDD-V damper
Slows the door down and pulls it shut over the last ~10°. For door leaves of 15–40 kg, up to 900 mm wide.
Optional
Athmer Stadi automatic drop seal
Drops only once the door is fully closed and lifts immediately on opening. For when better sound insulation is required.
Optional
STOPPINO magnetic door stop
A pin at the bottom of the door leaf and a 5 mm plate on the floor. Colours: white, black, matt nickel, polished brass.
Price
What determines the price
Every door is made to the dimensions of the opening, so we calculate the price based on your project.
01
Height and width
The taller and wider the door leaf, the more materials and hinges it requires.
02
Finish on both sides
Each side can have its own finish – veneer, sintered stone slab, mirror, paint.
03
Door class
Standard, acoustic, smoke-tight or fire-rated doors – the construction differs.
04
Hardware
Door closer, damper, automatic drop seal, door stop.
05
Installation
The doors are installed by our own installation team.
Send us the opening dimensions, a drawing or an interior visualisation.
Downloads
Technical files
The technical data sheet and installation detail drawings – for masonry and plasterboard walls, wall panels and ceilings – are available on request.
Chosen
Projects with EGD-LUXUS
Vilnius
Door flush with the wall finish, bathroom
Kaunas
Door flush with the wall finish
House
Pocket sliding doors
How tall can EGD-LUXUS doors be?
Hinged – up to 3200 mm, sliding – up to 3600 mm, acoustic – up to 3200 mm. The height limit works together with the weight limit: the taller the leaf, the narrower it can be.
Why do tall EGD-LUXUS doors not warp?
Not only the frame but the entire door leaf frame (core structure) is made of aluminium. As a result, the doors retain their geometry regardless of whether there is a humid bathroom or a cold garage on one side.
Can the two sides of the door have different finishes?
Yes. One side can have one finish and the other side a different one – for example, oak veneer and the wall colour.
Which finishes can be chosen?
Natural oak veneer (painted or stained), milled panel, LAMINAM sintered stone slab, granite slab, mirror, lacquered glass, SMART film, decorative or clay plaster, microcement, tiles, wallpaper, canvas, leather, artwork, the wall colour. Paint – any colour from the RAL palette.
How many hinges are needed and what weight can they carry?
Up to 2400 mm in height – 2 hinges, 2400–2800 mm – 3, taller doors – 4; acoustic doors – at least 3. According to the manufacturer, for a 900 mm wide door leaf 2 hinges carry 80 kg and 3 hinges 120 kg. The hinges fitted in all EGD-LUXUS doors withstood more than 200,000 opening cycles with an 80 kg door leaf in laboratory testing (GTC, LST EN 1191) – without damage and without additional adjustment.
Can doors with the same appearance be fire-rated or smoke-tight?
Yes. LINE 50F – fire resistance E 30, EW 30, EI2 30 and smoke tightness Sa3, S200; LINE 50S – smoke tightness Sa3, S200. Both have been awarded self-closing durability class C5 (certificates SPSC-9711 and SPSC-9712). The door leaf thickness is the same – 51 mm – and so are the finishes.
At what angle do the doors open?
With concealed hinges – 180°. With the integrated GEZE ActiveStop door closer – up to 140°; the opening angle is adjustable from 80° to 140°.
How is the frame joined to the wall?
The frame is plastered in. Installation details are available for masonry and plasterboard walls, wall panels, and plasterboard and concrete ceilings. The wall finish is brought to approximately 0.5 mm from the edge of the frame. Detail drawings are available on request.
Combining systems
Combines with glass partitions
EGD-LUXUS doors can be combined with EGD-SLIM30 glass partitions and glazed side panels – wood and glass in a single solution.
See also
Related solutions
Interior doors
Concealed floor-to-ceiling doors
Plaster-in frame, doors without architraves. Hinged, up to 3200 mm.
Learn more
Special doors
Acoustic interior doors
Acoustic infill and membrane – optional. Up to 3200 mm, at least 3 hinges.
Learn more
Special doors
Fire-rated and smoke-tight
LINE 50F: E 30, EW 30, EI2 30. LINE 50S: Sa3, S200. 51 mm door leaf, as with the other doors.
Learn more
Visible part of the profile
30 mm
Glass
8 mm toughened
Doors
up to 2800 mm
Partitions
up to 3000 mm
Aluminium-and-glass systems
EGD-SLIM30 glass partitions and doors
42 × 30 mm aluminium profile, CNC-machined.
Learn more
Enquiry
Let's discuss your EGD-LUXUS doors
Send us the opening dimensions, a drawing or an interior visualisation. We will reply and prepare a quotation.
Visit our showroom
In the showroom, you can examine the door construction. Please arrange your visit in advance.