Home › Solutions › Hinged doors › Doors with architraves
When the walls are already finished but you would like tall doors, they are installed with architraves.
These are the same EGD-LUXUS doors – with an aluminium leaf frame, concealed hinges and the finish of your choice. The only difference is that architraves are additionally made to measure and installed. Doors with architraves are made up to 3200 mm high.
The architraves are either in the same finish as the doors or made from aluminium sheet, designed and manufactured to suit the door opening and painted the same colour as the door leaf frame.
A plaster-in frame is installed before the walls are finished and is plastered over together with the wall – the door and the wall remain in one plane, with no architraves.
With architraves – when the walls are already finished and a plaster-in frame can no longer be installed. The frame is fitted into the finished opening, and the architraves cover its junction with the wall.
The two can also be combined: on one side the door is installed flush with the wall, while on the other side the architraves remain.
If the wall finishes are still being planned, a plaster-in frame is the better choice.
Architraves can also be fitted to doors with a transom panel – they then frame the entire opening together with the transom panel.
On the other side, the same door can be flush with the wall – for example, a veneer-clad wall.
An aluminium leaf frame (core frame) runs around the entire perimeter, so tall doors retain their geometry and do not warp. Leaf thickness – 51 mm.
Finishes – natural wood veneer, quartz or granite slab, mirror, painted in any RAL colour, and more. The finish can differ on each side of the door.
JNF IN.05.062 with 3D adjustment. The hinges fitted to all EGD-LUXUS doors withstood more than 200,000 opening cycles with an 80 kg door leaf in a laboratory test (GTC, LST EN 1191) – without damage and without additional adjustment.
The 4 mm finish is recessed into the leaf frame, and 3 mm aluminium edging around the entire perimeter protects its edge – the door does not peel or chip.
Doors flush with the walls – with natural wood veneer, furniture board, mirrors or tiles. You choose the opening direction freely – the door still remains flush with the wall.
When the door opening is not tall enough, but you want the look of a tall door. Doors with a side panel, or a fixed side panel only – in the same finish as the doors.
Send us the opening dimensions, ceiling height and wall thickness – we will propose a solution for doors with architraves.
Please arrange your visit in advance.