Plaster-in frame
The frame is plastered flush into the wall. The door can reach the ceiling.
Home › Solutions › Hinged doors › Floor-to-ceiling concealed doors
Concealed, hidden, architrave-free – these are the names given to doors with a plaster-in frame and no architraves, where the door sits flush with the wall. We make such EGD-LUXUS doors right up to the ceiling: hinged doors up to 3200 mm, sliding doors up to 3600 mm.
height of hinged concealed doors – right up to the ceiling
height of sliding doors
aluminium edge strip protects the edge of the finish around the entire perimeter
opening cycles with an 80 kg door leaf, GTC test to LST EN 1191
Conventional tall timber doors warp over time due to changes in temperature or humidity between different rooms – they have to be readjusted constantly.
Concealed doors with a plaster-in frame are not easily replaced: changing the door means redoing the wall finish. That is why tall doors should be chosen with care.
In EGD-LUXUS doors, not only the frame but the entire door leaf frame (core structure) is made of aluminium. As a result, the doors retain their geometry and do not warp.
A humid bathroom or a cold garage on one side of the door, and a warm room on the other.
Heavy tiles on one side of the door, a light MDF board on the other when the door is painted in the wall colour.
Tiles, quartz or granite slab, mirror – the hinges must carry the door leaf.
Replacing a door with a plaster-in frame means redoing the wall finish.
Leaf core structure – aluminium profiles around the entire perimeter; frame – aluminium, plaster-in. The finish is recessed into the leaf frame, so the door sits flush with the wall.
door leaf thickness
frame depth / overall depth
aluminium edge strip around the entire leaf perimeter
opening angle with concealed hinges
Doors with the same appearance can be acoustic, smoke-tight (LINE 50S – Sa3, S200) and fire-rated (LINE 50F – E 30, EW 30, EI2 30).
The frame is plastered flush into the wall. The door can reach the ceiling.
Leaf core structure – aluminium profiles around the entire perimeter.
JNF IN.05.062 with 3D adjustment. The hinges fitted to all EGD-LUXUS doors withstood more than 200 000 opening cycles with an 80 kg door leaf in a laboratory test (GTC, LST EN 1191) – without damage and without additional adjustment.
The 4 mm finish is recessed into the leaf frame, and a 3 mm aluminium edge strip protects its edge. Core – Stadur multi-layer thermal insulation board.
On masonry and plasterboard walls, the finish is brought to approximately 0.5 mm from the frame edge; with wall panels, approximately 2 mm.
When the door does not reach the ceiling.
When the door reaches right up to the ceiling.
When the door leaf reaches the ceiling between rooms and the ceiling is at one level.
7 mm plaster-in head profile.
Expanding tape and acrylic sealant, gap ~2 mm.
On masonry and plasterboard walls, the finish is brought to ~0.5 mm from the frame edge; with wall panels, ~2 mm.
The height limit works together with the weight limit – the taller the door leaf, the narrower it can be.
| Dimensions | |
|---|---|
| Max. height – hinged | 3200 mm |
| Max. height – sliding | 3600 mm |
| Max. height – acoustic | 3200 mm |
| Construction | |
| Leaf thickness | 51 mm |
| Leaf frame | Aluminium core structure around the entire perimeter |
| Frame | Aluminium, plaster-in, without architraves |
| Frame depth / overall depth | 30 mm / 44 mm |
| Reveal thickness | 10–15 mm |
| Finish | 4 mm, recessed into the leaf frame; may differ on each side |
| Edge strip | 3 mm aluminium, around the entire leaf perimeter |
| Hardware | |
| Hinges | Concealed, 3D adjustment, open to 180° |
| Number of hinges | Up to 2400 mm – 2; 2400–2800 mm – 3; over 2800 mm – 4 |
| Hinge load capacity (900 mm wide leaf) | 2 hinges – 80 kg; 3 hinges – 120 kg |
| Lock | Magnetic lock |
The finish may differ on each side of the door. Painting – any colour from the RAL palette.
Every door is made to the dimensions of the opening, so we calculate the price based on your project.
The taller and wider the door leaf, the more materials and hinges it requires.
Standard frame, floor-to-ceiling frame or non-standard – when the leaf reaches the ceiling between rooms.
Wall colour, wallpaper, plaster, tiles, mirror, veneer – each side can be different.
Standard, acoustic, smoke-tight or fire-rated doors – the construction differs.
The doors are installed by our own installation team.
Send us the height and width of the opening, a drawing or an interior visualisation.
Door flush with the wall finish, bathroom
Pocket sliding doors
Floor-to-ceiling door next to a white wall
Didn’t find an answer? Write to us.
These are different names for the same solution: the frame is plastered in, there are no architraves, and the door sits flush with the wall. EGD-LUXUS doors are made without architraves.
Yes. There is a standard frame solution for floor-to-ceiling doors and a non-standard one – for when the leaf reaches the ceiling between rooms and the ceiling is at one level. Details have been developed for plasterboard and concrete ceilings.
Hinged – up to 3200 mm, sliding – up to 3600 mm, acoustic – up to 3200 mm. The height limit works together with the weight limit: the taller the leaf, the narrower it can be.
Not only the frame but the entire door leaf frame (core structure) is made of aluminium. As a result, the doors retain their geometry regardless of whether there is a humid bathroom or a cold garage on one side.
Yes. The primed MDF board is painted in the wall colour – any colour from the RAL palette. Wallpaper, decorative or clay plaster, microcement and tiles are also possible.
Yes, mirror, tiles, quartz and granite slabs are on the list of finishes. According to the manufacturer’s data, for a 900 mm wide leaf, 2 hinges carry 80 kg and 3 hinges carry 120 kg.
Yes. LINE 50F – fire resistance E 30, EW 30, EI2 30 and smoke tightness Sa3, S200; LINE 50S – smoke tightness Sa3, S200. Both have been assigned self-closing durability class C5. They look the same as the other doors.
Aluminium frame and leaf frame. All technical data, finishes and hardware.
EGD-LUXUS sliding doors – up to 3600 mm high.
Acoustic core and membrane – optional. Up to 3200 mm high.
LINE 50F: E 30, EW 30, EI2 30. LINE 50S: Sa3, S200. Door leaf 51 mm.
Send us the height and width of the opening, the wall thickness, a drawing or an interior visualisation. We will reply and prepare a quotation.
In the showroom, you can examine the door construction. Please arrange your visit in advance.